Products

Rope Wire with Loop & Suspension Lock is a heavy-duty steel suspension cable designed for cold room installations such as ceiling panels, evaporators, lighting, ducts, or shelving supports. It comes pre-formed with looped ends and a locking mechanism for secure, quick installation. Supports approx. 220–300 kg safe working load, Suitable for 4.0–6.0 mm wire diameter, Allows firm holding + easy adjustment, Built for corrosion resistance in low-temperature environments, High-strength galvanized/stainless steel wire, Pre-crimped loops for secure anchoring, Quick installation with lock system, Designed for cold storage & freezer rooms, Resistant to moisture, rust, and temperature stress, Suspended evaporator units, Ceiling panel reinforcement, Hanging lighting systems, Cable tray or pipe suspension, Insulated structure support,

Camlock PUF Panels These are insulated sandwich panels with a camlock joint system for easy assembly, commonly used in cold rooms, clean rooms, and insulated enclosures. HIPS Natural Material High Impact Polystyrene (HIPS) is a tough, durable plastic used in applications where impact resistance is important. “Natural” usually refers to its uncolored or base form. Use of HIPS Natural in Camlock PUF Panels: Inner/Outer Layer Cladding: HIPS sheets are often used as the facing material on one or both sides of the PUF (Polyurethane Foam) core. Hygienic Surfaces: Especially in food storage or clean room panels, HIPS provides a smooth, non-porous, and easy-to-clean surface. Impact Resistance: It offers good resistance to physical damage, making the panels durable in harsh environments. Thermal Compatibility: Works well with PUF in terms of thermal expansion and bonding. Advantages: Lightweight and cost-effective. Hygienic and chemically resistant.

Aluminium T-profile, commonly referred to as Aluminium T-section or T-bar. This specific profile is often used in PUF panel installations and cold room constructions. Uses of Aluminium T-Profile in PUF Panels: 1. Joint Covering:Used to cover the joints between two PUF panels, especially in wall-to-wall or wall-to-ceiling connections. 2. Reinforcement:Provides structural strength and support along panel junctions or edges. 3. Aesthetic Finish:Offers a clean, neat, and professional finish by hiding visible panel gaps. 4. Moisture Barrier:Helps in sealing the joints to prevent moisture or air ingress. Material Advantages: Corrosion-resistant (Aluminium) Lightweight Durable Easy to install

A self-locking door lock in a deep freezer is a mechanism designed to keep the freezer door securely closed, preventing accidental openings and ensuring efficient cooling. Types of Self-Locking Mechanisms in Deep Freezers: 1. Magnetic Seal Lock – Uses a strong magnetic gasket to keep the door closed. 2. Mechanical Latch Lock – A built-in latch that automatically locks when the door is shut. 3. Keyed Lock System – Provides additional security, especially in commercial freezers. 4. Push-to-Close Lock – Engages automatically when the door is pushed shut. Why Is It Important? Maintains consistent internal temperature. Prevents accidental openings that can cause food spoilage. Enhances safety, especially in commercial or shared-use freezers

Aluminium PVC Coving, specifically designed for PUF panel applications such as in cold rooms, cleanrooms, and hygienic areas. Aluminium PVC coving is a curved or angled profile that’s used where walls meet floors or ceilings, providing a smooth, rounded transition. It combines: Aluminium base for strength and stability. PVC (polyvinyl chloride) cover or coating for hygiene, easy cleaning, and aesthetics. Applications in PUF Panels: 1. Hygienic Transition Joint:Installed at wall-to-floor or wall-to-ceiling junctions to avoid sharp 90° angles, reducing dust and microbial buildup. 2. Cleanroom & Cold Room Use:Commonly used in pharmaceutical, food processing, and cold storage areas that require easy-to-clean and seamless surfaces. 3. Structural Edge Finishing:Enhances the overall look and finish of the PUF panel installation while protecting corners from damage. 4. Compliance:Helps meet GMP and HACCP guidelines in clean areas. Common Sizes (can vary by manufacturer): Radius: 25mm or 50mm Length: Usually 8ft (2.44m) or customized

These are components commonly used in PUF (Polyurethane Foam) insulated panel systems, particularly for cold rooms, clean rooms, or modular enclosures. 2D Corner (Aluminium 2D Corner) Purpose: Used for joining two panels at a 90° corner (like wall-to-wall junctions). Material: Likely aluminum, offering strength, corrosion resistance, and a clean finish. Application: Internal or external vertical corner junctions. Often seen in cold room construction where walls meet. 3D Corner (Aluminium 3D Corner) Purpose: Used for 3-way corner joints, where three panels meet — such as wall-wall-ceiling or wall-wall-floor intersections. Material: Also typically aluminum for structural and hygienic benefits. Application: Used in room corners where all three planes meet. Ensures proper sealing and alignment in cold rooms or modular structures. Clean and professional finishing. Easy installation and alignment. Enhanced thermal insulation integrity (no thermal bridging). Prevents dust and moisture ingress at panel joints.

PTFE Gasket for Flange PTFE (Polytetrafluoroethylene) flange gasket designed for reliable sealing between flanged joints. It is suitable for grain silos, storage tanks, pipelines, and industrial equipment where chemical resistance and leak-proof performance are required. Made from 100% PTFE Excellent chemical, corrosion, and moisture resistance Wide temperature tolerance Non-stick, non-aging material Prevents leakage of grains, powders, liquids, and gases Suitable for food-grade and industrial applications Grain silo flanges Storage tanks Chemical & water pipelines Food processing and industrial plants

Door Tray For Use Freezer On Wheel Dimension: Door (280 mm x 406 mm), Tray (325mm x 465mm) This door tray is designed for use in commercial freezers mounted on wheels. It is fitted on the freezer door to provide support, protection, and proper alignment. Made from durable plastic material, it helps maintain door stability during movement and frequent opening/closing. Suitable for freezer on wheel Strong and durable plastic Helps in smooth door operation Resistant to low temperatures

Pipe – Water Cooler This is a flexible corrugated pipe used in water coolers for water flow and drainage. Type: Flexible corrugated pipe Material: Food-grade plastic (PVC) Color: Transparent / milky white Length: As per requirement (custom cut) Used for water inlet, outlet, or overflow connection Commonly connected between tank, tap, or drain Commercial water coolers Drinking water machines Cold water tanks Flexible and easy to bend Leak-proof with proper clamp Durable and long-lasting Easy installation and replacement

Thermostat – Water Cooler This is a capillary-type thermostat used in commercial water coolers to control water temperature. Type: Mechanical thermostat (capillary sensor) Material: Metal body with temperature control knob Capillary Length: Long sensor tube for accurate sensing Adjustment: Rotary dial (Cold ↔ Less Cold) Automatically controls cooling ON/OFF Maintains required cold water temperature Prevents over-cooling and compressor damage Commercial water coolers Drinking water machines Industrial cooling units Accurate temperature control Easy installation Long service life

Tap Connector 40 & 50 mm – Water Cooler This is a brass tap connector used in commercial / industrial water coolers. Material: Brass (nickel/chrome plated) Sizes: 40 mm 50 mm Type: Threaded tap connector with rubber washer Finish: Corrosion-resistant for long life Connects the water tap / inlet pipe to the water cooler body or tank Provides leak-proof water flow Commonly used in: Commercial water coolers Drinking water machines Cold water tanks Strong and durable brass body Easy installation Tight sealing with rubber gasket Suitable for continuous water supply

Push Cock (Brass) A Brass Push Cock, commonly used in water coolers for dispensing drinking water. Made from high-quality brass Chrome / nickel plated finish Push-type operation (press to release water) Supplied with rubber washers & nut for fixing Drinking water outlet in water coolers Used in commercial & industrial coolers Suitable for cold water dispensing Smooth push action Leak-proof sealing Strong & corrosion-resistant Long working life Common Applications Water coolers RO systems Water dispensers Storage tanks Typical Sizes ½ inch BSP thread ¾ inch (on demand) Easy installation Hygienic water flow Low maintenance