2D Profiles (Flat / Straight Sections) These are flat or slightly curved panels. Used for wall cladding joints, partitions, and straight transitions. Materials: PVC → lightweight, corrosion-resistant, easy to clean. Aluminum → stronger, more durable, often used where structural rigidity is needed. 3D Profiles (Extruded Sections) The complex cross-section pieces (seen in the middle). Designed for joining panels, creating sealed connections, and improving structural integrity. Often used in: Modular cleanroom panels Ceiling-to-wall joints Provide airtight sealing, which is critical in cleanrooms. Coving (Corners & Junctions) The curved corner pieces (bottom right and top right). Wall-to-floor Wall-to-wall Wall-to-ceiling intersections Eliminates sharp 90° corners Prevents dust and microbial buildup Makes cleaning and sanitization easier Why These Are Important in Cleanrooms Maintain hygienic, seamless surfaces Support GMP (Good Manufacturing Practice) compliance Resist chemicals and disinfectants Help control particle accumulation Pharmaceutical manufacturing Hospitals & operation theatres Food processing units Laboratories & electronics manufacturing

Rope Wire & Lock A steel wire rope with locking mechanism. Used for suspending ceiling systems, lights, or panels. Allows height adjustment and secure locking. Bottom Loop The looped end of the wire/rod system. Provides a hooking point for fixtures or frames. Ensures stable and aligned suspension. Tie Rod (Threaded Rod) The long fully threaded metal rods in the center. Used to support ceiling grids or structures from the slab above. Adjustable with nuts for precise leveling. Eye Bolt The rod with a circular ring (eye) at the top. Used as a mounting anchor for suspension systems. Connects with wire ropes, chains, or hooks. Aluminium “T” Section The T-shaped aluminum profile. Used in ceiling grid frameworks (like cleanroom ceilings). Lightweight, corrosion-resistant, and easy to install. Minidoom (Leveling Foot / Base) The round white base with threaded insert. Used for supporting panels or structures from below. Provides: Height adjustment Load distribution Stability on floors Bracket / Support Clamp The small metal bracket (left side). Used to connect rods, wires, or profiles to structures. Ensures firm anchoring and alignment. Typical Use in Cleanrooms These components work together to: Create suspended ceiling systems Support HEPA filters, lights, and panels Maintain precision alignment and load stability Ensure clean, contamination-free installations

Rope Wire with Loop & Suspension Lock is a heavy-duty steel suspension cable designed for cold room installations such as ceiling panels, evaporators, lighting, ducts, or shelving supports. It comes pre-formed with looped ends and a locking mechanism for secure, quick installation. Supports approx. 220–300 kg safe working load, Suitable for 4.0–6.0 mm wire diameter, Allows firm holding + easy adjustment, Built for corrosion resistance in low-temperature environments, High-strength galvanized/stainless steel wire, Pre-crimped loops for secure anchoring, Quick installation with lock system, Designed for cold storage & freezer rooms, Resistant to moisture, rust, and temperature stress, Suspended evaporator units, Ceiling panel reinforcement, Hanging lighting systems, Cable tray or pipe suspension, Insulated structure support,